HIGH-SPEED PHOTOGRAPHY

 Nine high-speed cameras were used to record the side-impact collision. All high-speed cameras were loaded with Kodak color daylight film 2253. The cameras operated at 500 frames/s and were positioned for best viewing of the contact between the Chevrolet C2500 and the rigid pole. Three 35-mm still cameras and one 16-mm real-time telecine camera were used to document the pre- and post-crash environment. Table 6 lists the position and lens used for each camera. The camera numbers in table 6 are shown in figure 6. The interior of the driver door was painted flat white for better onboard camera image quality.

Table 6. Camera configuration and placement
Camera Number	Type	Film Speed (frames/s)	Lens (mm)	Location
1	LOCAM II	500	100	90° to impact right side
2	LOCAM II	500	75	90° to impact right side
3	PHOTEC	500	45	90° to impact right side
4	LOCAM II	500	50	45° right side
5	LOCAM II	500	25	180° mounted behind rigid pole
6	LOCAM II	500	50	45° left side oblique
7	LOCAM II	500	75	45° left side oblique
8	LOCAM II	500	12.5	overhead, over pole
9	LOCAM II	500	5.7	onboard in passenger window
10	Bolex	24	zoom	documentary
11	Canon A-1 (prints)	still	zoom	documentary
12	Canon A-1 (slides)	still	zoom	documentary

Black and yellow circular targets and 25-mm-wide black and yellow target tape were placed on the Chevrolet pickup truck for film data collection purposes. Circular targets and target tape were placed on the vehicle for certain vehicle measurements and for film analysis. The 25-mm tape was placed on the driver side of the vehicle at five levels or elevations referenced from the ground. The levels included: